dmesg - NVIDIA GeForce GTX 1070 with Max-Q Design
Linux version 4.17.2 (brainiarc7@slimkiller) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #1 SMP PREEMPT Mon Jun 18 09:38:29 EAT 2018
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000006d844fff] usable
BIOS-e820: [mem 0x000000006d845000-0x000000006e98bfff] reserved
BIOS-e820: [mem 0x000000006e98c000-0x000000006f0c6fff] usable
BIOS-e820: [mem 0x000000006f0c7000-0x000000006f207fff] ACPI NVS
BIOS-e820: [mem 0x000000006f208000-0x000000006fc44fff] reserved
BIOS-e820: [mem 0x000000006fc45000-0x000000006fd0efff] type 20
BIOS-e820: [mem 0x000000006fd0f000-0x000000006fd0ffff] usable
BIOS-e820: [mem 0x000000006fd10000-0x000000007cffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000880ffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0x6f10a000 ACPI=0x6f10a000 SMBIOS=0x6fa9c000 SMBIOS 3.0=0x6fa9b000 ESRT=0x6be28898 MEMATTR=0x69f19018
SMBIOS 3.1.1 present.
DMI: Eurocom Q6/ Q6, BIOS 7.005 05/09/2018
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x881000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0080000000 mask 7FF0000000 write-combining
1 base 0078000000 mask 7FF8000000 uncachable
2 base 0100000000 mask 7F00000000 write-back
3 base 0000000000 mask 7F80000000 write-back
4 base 0200000000 mask 7E00000000 write-back
5 base 0400000000 mask 7C00000000 write-back
6 base 0800000000 mask 7F80000000 write-back
7 base 0880000000 mask 7FE0000000 write-back
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x6fd10 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000006be28898 to 0x000000006be288d0.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ (ptrval)] 98000 size 24576
Using GB pages for direct mapping
BRK [0x29f772000, 0x29f772fff] PGTABLE
BRK [0x29f773000, 0x29f773fff] PGTABLE
BRK [0x29f774000, 0x29f774fff] PGTABLE
BRK [0x29f775000, 0x29f775fff] PGTABLE
BRK [0x29f776000, 0x29f776fff] PGTABLE
BRK [0x29f777000, 0x29f777fff] PGTABLE
BRK [0x29f778000, 0x29f778fff] PGTABLE
BRK [0x29f779000, 0x29f779fff] PGTABLE
BRK [0x29f77a000, 0x29f77afff] PGTABLE
BRK [0x29f77b000, 0x29f77bfff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x2fe97000-0x33f42fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006F10A000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006F10A0A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006F14F848 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000006F10A208 045639 (v02 ALASKA A M I 01072009 INTL 20160527)
ACPI: FACS 0x000000006F207080 000040
ACPI: APIC 0x000000006F14F960 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006F14FA58 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000006F14FAA0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006F14FB40 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000006F14FB80 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
ACPI: SSDT 0x000000006F14FEB8 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000006F151690 001891 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x000000006F152F28 0020AF (v02 PegSsd PegSsdt 00001000 INTL 20160527)
ACPI: UEFI 0x000000006F154FD8 000048 (v01 ALASKA A M I 00000002 01000013)
ACPI: LPIT 0x000000006F155020 00005C (v01 INTEL A M I 00000002 01000013)
ACPI: SSDT 0x000000006F155080 001A28 (v02 INTEL PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x000000006F156AA8 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x000000006F157AA8 000034 (v01 ALASKA A M I 00000002 01000013)
ACPI: DBG2 0x000000006F157AE0 000054 (v00 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x000000006F157B38 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
ACPI: DMAR 0x000000006F157BE8 0000A8 (v01 INTEL EDK2 00000002 01000013)
ACPI: BGRT 0x000000006F157C90 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x000000006F157CC8 000034 (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: SSDT 0x000000006F157D00 001EDD (v01 OptRef OptTabl 00001000 INTL 20160527)
ACPI: WSMT 0x000000006F159BE0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000880ffffff]
NODE_DATA(0) allocated [mem 0x880fd5000-0x880ffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000880ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000006d844fff]
node 0: [mem 0x000000006e98c000-0x000000006f0c6fff]
node 0: [mem 0x000000006fd0f000-0x000000006fd0ffff]
node 0: [mem 0x0000000100000000-0x0000000880ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000880ffffff]
On node 0 totalpages: 8318751
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 6975 pages used for memmap
DMA32 zone: 446337 pages, LIFO batch:31
Normal zone: 122944 pages used for memmap
Normal zone: 7868416 pages, LIFO batch:31
Reserved but unavailable: 98 pages
Reserving Intel graphics memory at [mem 0x79000000-0x7cffffff]
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
PM: Registered nosave memory: [mem 0x6d845000-0x6e98bfff]
PM: Registered nosave memory: [mem 0x6f0c7000-0x6f207fff]
PM: Registered nosave memory: [mem 0x6f208000-0x6fc44fff]
PM: Registered nosave memory: [mem 0x6fc45000-0x6fd0efff]
PM: Registered nosave memory: [mem 0x6fd10000-0x7cffffff]
PM: Registered nosave memory: [mem 0x7d000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x7d000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
random: get_random_bytes called from start_kernel+0x99/0x564 with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists, mobility grouping on. Total pages: 8188745
Policy zone: Normal
DMAR: IOMMU enabled
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32538500K/33275004K available (14348K kernel code, 2749K rwdata, 4388K rodata, 2364K init, 2384K bss, 736504K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 40362 entries in 158 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20180313
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000006f82f000 end: 0x0000006fa78fff
DMAR: RMRR base: 0x00000078800000 end: 0x0000007cffffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Detected 2200.000 MHz processor
tsc: Detected 2208.000 MHz TSC
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4416.00 BogoMIPS (lpj=2208000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 12 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
Spectre V2 : Enabling Restricted Speculation for firmware calls
Speculative Store Bypass: Vulnerable
Freeing SMP alternatives memory: 36K
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 12 processors activated (52992.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x6f0c7000-0x6f207fff] (1314816 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:52:02, date: 06/26/18
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1530013922.106:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Disabled all _OSI OS vendors
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Windows 2009)
ACPI: 9 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFF1C6CD000 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFF1C35C800 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFF1BC5C000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8DFF1C359800 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 7F
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [DRST] (on)
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [V0PR] (on)
ACPI: Power Resource [V1PR] (on)
ACPI: Power Resource [V2PR] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [PIN] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x7d000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x7d000000-0x7dffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:02.0: BAR 2: assigned to efifb
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0x7f61e000-0x7f61efff 64bit]
pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
pci 0000:00:12.0: reg 0x10: [mem 0x7f61d000-0x7f61dfff 64bit]
pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x7f600000-0x7f60ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
pci 0000:00:14.2: reg 0x10: [mem 0x7f616000-0x7f617fff 64bit]
pci 0000:00:14.2: reg 0x18: [mem 0x7f61c000-0x7f61cfff 64bit]
pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x7f61b000-0x7f61bfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a353] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0x7f614000-0x7f615fff]
pci 0000:00:17.0: reg 0x14: [mem 0x7f61a000-0x7f61a0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5090-0x5097]
pci 0000:00:17.0: reg 0x1c: [io 0x5080-0x5083]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0x7f619000-0x7f6197ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
pci 0000:00:1d.5: [8086:a335] type 01 class 0x060400
pci 0000:00:1d.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.5: PTM enabled (root), 4dns granularity
pci 0000:00:1d.6: [8086:a336] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: PTM enabled (root), 4dns granularity
pci 0000:00:1d.7: [8086:a337] type 01 class 0x060400
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PTM enabled (root), 4dns granularity
pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0x7f610000-0x7f613fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0x7f100000-0x7f1fffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0x7f618000-0x7f6180ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
pci 0000:01:00.0: [10de:1ba1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x7e000000-0x7effffff]
pci 0000:01:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x4000-0x407f]
pci 0000:01:00.0: reg 0x30: [mem 0x7f000000-0x7f07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0x7e000000-0x7f0fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
pci 0000:02:00.0: reg 0x10: [mem 0x7f500000-0x7f503fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0x7f500000-0x7f5fffff]
pci 0000:03:00.0: [8086:2526] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0x7f400000-0x7f403fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.5: ASPM: current common clock configuration is broken, reconfiguring
pci 0000:00:1d.5: PCI bridge to [bus 03]
pci 0000:00:1d.5: bridge window [mem 0x7f400000-0x7f4fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:04:00.0: reg 0x18: [mem 0x7f300000-0x7f300fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xa2100000-0xa2103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1d.6: PCI bridge to [bus 04]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0x7f300000-0x7f3fffff]
pci 0000:00:1d.6: bridge window [mem 0xa2100000-0xa21fffff 64bit pref]
pci 0000:05:00.0: [10ec:5250] type 00 class 0x080501
pci 0000:05:00.0: reg 0x10: [mem 0x7f201000-0x7f201fff]
pci 0000:05:00.0: reg 0x14: [mem 0x7f200000-0x7f200fff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1d.7: PCI bridge to [bus 05]
pci 0000:00:1d.7: bridge window [mem 0x7f200000-0x7f2fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x57, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x6d845000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f0c7000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6fd10000-0x6fffffff]
e820: reserve RAM buffer [mem 0x881000000-0x883ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SYN1220 PNP0f13 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x1800-0x18fe] could not be reserved
system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0x2000-0x20fe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:01.0: bridge window [mem 0x7e000000-0x7f0fffff]
pci 0000:00:01.0: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.0: bridge window [mem 0x7f500000-0x7f5fffff]
pci 0000:00:1d.5: PCI bridge to [bus 03]
pci 0000:00:1d.5: bridge window [mem 0x7f400000-0x7f4fffff]
pci 0000:00:1d.6: PCI bridge to [bus 04]
pci 0000:00:1d.6: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.6: bridge window [mem 0x7f300000-0x7f3fffff]
pci 0000:00:1d.6: bridge window [mem 0xa2100000-0xa21fffff 64bit pref]
pci 0000:00:1d.7: PCI bridge to [bus 05]
pci 0000:00:1d.7: bridge window [mem 0x7f200000-0x7f2fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 12 [mem 0x7d000000-0xdfffffff window]
pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0x7e000000-0x7f0fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0x7f500000-0x7f5fffff]
pci_bus 0000:03: resource 1 [mem 0x7f400000-0x7f4fffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0x7f300000-0x7f3fffff]
pci_bus 0000:04: resource 2 [mem 0xa2100000-0xa21fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0x7f200000-0x7f2fffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 66224K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
dmar0: Allocated order 8 PASID table.
DMAR: dmar1: Using Queued invalidation
DMAR: Hardware identity mapping for device 0000:00:00.0
DMAR: Hardware identity mapping for device 0000:00:01.0
DMAR: Hardware identity mapping for device 0000:00:02.0
DMAR: Hardware identity mapping for device 0000:00:08.0
DMAR: Hardware identity mapping for device 0000:00:12.0
DMAR: Hardware identity mapping for device 0000:00:14.0
DMAR: Hardware identity mapping for device 0000:00:14.2
DMAR: Hardware identity mapping for device 0000:00:16.0
DMAR: Hardware identity mapping for device 0000:00:17.0
DMAR: Hardware identity mapping for device 0000:00:1d.0
DMAR: Hardware identity mapping for device 0000:00:1d.5
DMAR: Hardware identity mapping for device 0000:00:1d.6
DMAR: Hardware identity mapping for device 0000:00:1d.7
DMAR: Hardware identity mapping for device 0000:00:1f.0
DMAR: Hardware identity mapping for device 0000:00:1f.3
DMAR: Hardware identity mapping for device 0000:00:1f.4
DMAR: Hardware identity mapping for device 0000:00:1f.5
DMAR: Hardware identity mapping for device 0000:01:00.0
DMAR: Hardware identity mapping for device 0000:02:00.0
DMAR: Hardware identity mapping for device 0000:03:00.0
DMAR: Hardware identity mapping for device 0000:04:00.0
DMAR: Hardware identity mapping for device 0000:05:00.0
DMAR: Setting RMRR:
DMAR: Ignoring identity map for HW passthrough device 0000:00:02.0 [0x78800000 - 0x7cffffff]
DMAR: Ignoring identity map for HW passthrough device 0000:00:14.0 [0x6f82f000 - 0x6fa78fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0
iommu: Adding device 0000:00:01.0 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:08.0 to group 3
iommu: Adding device 0000:00:12.0 to group 4
iommu: Adding device 0000:00:14.0 to group 5
iommu: Adding device 0000:00:14.2 to group 5
iommu: Adding device 0000:00:16.0 to group 6
iommu: Adding device 0000:00:17.0 to group 7
iommu: Adding device 0000:00:1d.0 to group 8
iommu: Adding device 0000:00:1d.5 to group 9
iommu: Adding device 0000:00:1d.6 to group 10
iommu: Adding device 0000:00:1d.7 to group 11
iommu: Adding device 0000:00:1f.0 to group 12
iommu: Adding device 0000:00:1f.3 to group 12
iommu: Adding device 0000:00:1f.4 to group 12
iommu: Adding device 0000:00:1f.5 to group 12
iommu: Adding device 0000:01:00.0 to group 1
iommu: Adding device 0000:02:00.0 to group 13
iommu: Adding device 0000:03:00.0 to group 14
iommu: Adding device 0000:04:00.0 to group 15
iommu: Adding device 0000:05:00.0 to group 16
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
pstore: using deflate compression
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1d.0: AER enabled with IRQ 124
pcieport 0000:00:1d.5: AER enabled with IRQ 125
pcieport 0000:00:1d.6: AER enabled with IRQ 126
pcieport 0000:00:1d.7: AER enabled with IRQ 127
pcieport 0000:00:01.0: Signaling PME with IRQ 123
pcieport 0000:00:1d.0: Signaling PME with IRQ 124
pcieport 0000:00:1d.5: Signaling PME with IRQ 125
pcieport 0000:00:1d.6: Signaling PME with IRQ 126
pcieport 0000:00:1d.7: Signaling PME with IRQ 127
dpc 0000:00:1d.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:1d.5:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:1d.6:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
dpc 0000:00:1d.7:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
efifb: probing for efifb
efifb: framebuffer at 0x80000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ0] (34 C)
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
ACPI: Battery Slot [BAT0] (battery present)
loop: module loaded
nvme nvme0: pci function 0000:02:00.0
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.17.2 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.17.2 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:SYNM] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
intel_pmc_core: initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x906ea, pf=0x20, revision=0x84
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1906992356, 0)->(1903394084, 3598272)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 4dcaa3cdb5fd1f37126f77e77be35753b9919bbf'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
Magic number: 6:459:884
rtc_cmos 00:01: setting system clock to 2018-06-26 11:52:04 UTC (1530013924)
nvme0n1: p1 p2 p3 p4 p5 p6 p7
usb 1-4: new full-speed USB device number 2 using xhci_hcd
Freeing unused kernel memory: 2364K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel memory: 2008K
Freeing unused kernel memory: 1756K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
usb 1-4: New USB device found, idVendor=046d, idProduct=c332, bcdDevice= 3.02
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: Gaming Mouse G502
usb 1-4: Manufacturer: Logitech
usb 1-4: SerialNumber: 118236703235
ipmi message handler version 39.2
ipmi device interface
cryptd: max_cpu_qlen set to 1000
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: enabling device (0000 -> 0003)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sdhci-pci 0000:05:00.0: SDHCI controller found [10ec:5250] (rev 1)
sdhci-pci 0000:05:00.0: enabling device (0000 -> 0002)
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: enabling device (0000 -> 0003)
mmc0: Unknown controller version (3). You may experience problems.
DMAR: 32bit 0000:05:00.0 uses non-identity mapping
mmc0: SDHCI controller on PCI [0000:05:00.0] using ADMA
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 80:fa:5b:59:46:bc, XID 0c000800 IRQ 138
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0x7f619000 port 0x7f619300 irq 137
r8169 0000:04:00.0 enp4s0: renamed from eth0
[drm:intel_pch_type [i915]] Found Cannon Lake PCH (CNP)
[drm:intel_power_domains_init [i915]] Allowed DC state mask 03
pmd_set_huge: Cannot satisfy [mem 0x7d000000-0x7d200000] with a huge-page mapping due to MTRR override.
[drm:i915_driver_load [i915]] ppgtt mode: 3
[drm:intel_uc_sanitize_options [i915]] enable_guc=0 (submission:no huc:no)
[drm:intel_uc_sanitize_options [i915]] guc_log_level=0 (enabled:no verbosity:-1)
[drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
[drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
[drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
[drm] VT-d active for gfx access
checking generic (80000000 7f0000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
[drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x6f16e018
[drm:intel_opregion_setup [i915]] Public ACPI methods supported
[drm:intel_opregion_setup [i915]] SWSCI supported
[drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
[drm:intel_opregion_setup [i915]] ASLE supported
[drm:intel_opregion_setup [i915]] ASLE extension supported
[drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
[drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
[drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE ", BDB version 212
[drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
[drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
[drm:intel_bios_init [i915]] Panel type: 2 (VBT)
[drm:intel_bios_init [i915]] DRRS supported mode is static
[drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm:intel_bios_init [i915]] VBT initial LVDS value 300
[drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 400 Hz, active high, min brightness 15, level 80, controller 0
[drm:intel_bios_init [i915]] DRRS State Enabled:0
[drm:intel_bios_init [i915]] Skipping SDVO device mapping
[drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
[drm:intel_dsm_detect [i915]] no _DSM method for intel device
[drm:intel_dsm_detect [i915]] no _DSM method for intel device
[drm:intel_update_rawclk [i915]] rawclk rate: 24000 kHz
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[drm:intel_power_well_enable [i915]] enabling power well 1
[drm:intel_power_well_enable [i915]] enabling MISC IO power well
[drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
[drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
[drm:intel_update_max_cdclk [i915]] Max dotclock rate: 675000 kHz
[drm:intel_power_well_enable [i915]] enabling always-on
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
[drm:intel_power_well_enable [i915]] enabling power well 2
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:intel_power_well_enable [i915]] enabling DDI B IO power well
[drm:intel_power_well_enable [i915]] enabling DDI C IO power well
[drm:intel_power_well_enable [i915]] enabling DDI D IO power well
[drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 2 (2.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
[drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
[drm:intel_modeset_init [i915]] 3 display pipes available.
[drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
[drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
[drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
[drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
[drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
[drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
[drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
[drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0b 00
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:intel_psr_init_dpcd [i915]] Detected EDP PSR Panel.
[drm:intel_dp_init_connector [i915]] eDP DPCD: 02 92 a4
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
[drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 18823/60000
[drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
[drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
[drm:intel_set_plane_visible [i915]] pipe A active planes 0x1
[drm:intel_modeset_setup_hw_state [i915]] [CRTC:41:pipe A] hw state readout: enabled
[drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
[drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
[drm:intel_set_plane_visible [i915]] pipe B active planes 0x0
[drm:intel_modeset_setup_hw_state [i915]] [CRTC:55:pipe B] hw state readout: disabled
[drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
[drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
[drm:intel_set_plane_visible [i915]] pipe C active planes 0x0
[drm:intel_modeset_setup_hw_state [i915]] [CRTC:69:pipe C] hw state readout: disabled
[drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
[drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
[drm:intel_ddi_get_config [i915]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
[drm:intel_modeset_setup_hw_state [i915]] [ENCODER:70:DDI A] hw state readout: enabled, pipe A
[drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:71:eDP-1] hw state readout: enabled
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][setup_hw_state]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 4037483, gmch_n: 8388608, link_m: 336456, link_n: 524288, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 144 346539 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 144 346539 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 346539 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 346539
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [CRTC:55:pipe B][setup_hw_state]
[drm:intel_dump_pipe_config [i915]] output_types: (0x0)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:42:plane 1B] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:47:plane 2B] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:52:cursor B] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [CRTC:69:pipe C][setup_hw_state]
[drm:intel_dump_pipe_config [i915]] output_types: (0x0)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
[drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:56:plane 1C] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:61:plane 2C] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:66:cursor C] disabled, scaler_id = -1
[drm:intel_power_well_disable [i915]] disabling DDI D IO power well
[drm:intel_power_well_disable [i915]] disabling DDI C IO power well
[drm:intel_power_well_disable [i915]] disabling DDI B IO power well
[drm:intel_power_well_disable [i915]] disabling power well 2
[drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
[drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0x0000000000000000, gtt_offset=0x0000000000000000, size=0x00000000007e9000
[drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space
[drm:intel_set_plane_visible [i915]] pipe A active planes 0x0
[drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
[drm:i915_gem_contexts_init [i915]] logical context support initialized
[drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0xfffff000
[drm:intel_engine_init_common [i915]] rcs0 hws offset: 0xfffcf000
[drm:intel_engine_init_common [i915]] bcs0 hws offset: 0xfffc8000
[drm:intel_engine_init_common [i915]] vcs0 hws offset: 0xfffc1000
[drm:intel_engine_init_common [i915]] vecs0 hws offset: 0xfffba000
[drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 14
[drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
[drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
[drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
[drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
[drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
[drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
[drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[drm:intel_opregion_register [i915]] 1 outputs detected
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm:asle_work [i915]] bclp = 0x80000027
[drm:asle_work [i915]] updating opregion backlight 39/255
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 9176
[drm:asle_work [i915]] bclp = 0x800000ff
[drm:asle_work [i915]] updating opregion backlight 255/255
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
acpi device:02: registered as cooling_device12
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input14
i915 device info: pciid=0x3e9b rev=0x00 platform=COFFEELAKE gen=9
i915 device info: is_mobile: no
i915 device info: is_lp: no
i915 device info: is_alpha_support: no
i915 device info: has_64bit_reloc: yes
i915 device info: has_aliasing_ppgtt: yes
i915 device info: has_csr: yes
i915 device info: has_ddi: yes
[drm:drm_setup_crtcs [drm_kms_helper]]
i915 device info: has_dp_mst: yes
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
i915 device info: has_reset_engine: yes
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
i915 device info: has_fbc: yes
i915 device info: has_fpga_dbg: yes
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
i915 device info: has_full_ppgtt: yes
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
i915 device info: has_full_48bit_ppgtt: yes
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
i915 device info: has_gmch_display: no
i915 device info: has_guc: yes
i915 device info: has_guc_ct: no
i915 device info: has_hotplug: yes
i915 device info: has_l3_dpf: no
i915 device info: has_llc: yes
i915 device info: has_logical_ring_contexts: yes
i915 device info: has_logical_ring_elsq: no
i915 device info: has_logical_ring_preemption: yes
i915 device info: has_overlay: no
i915 device info: has_pooled_eu: no
i915 device info: has_psr: yes
i915 device info: has_rc6: yes
i915 device info: has_rc6p: no
i915 device info: has_resource_streamer: yes
i915 device info: has_runtime_pm: yes
i915 device info: has_snoop: no
i915 device info: unfenced_needs_alignment: no
i915 device info: cursor_needs_physical: no
i915 device info: hws_needs_physical: no
i915 device info: overlay_needs_physical: no
i915 device info: supports_tv: no
i915 device info: has_ipc: yes
i915 device info: slice mask: 0001
i915 device info: slice total: 1
i915 device info: subslice total: 3
i915 device info: slice0 3 subslices mask=0007
i915 device info: slice1 0 subslices mask=0000
i915 device info: slice2 0 subslices mask=0000
i915 device info: slice3 0 subslices mask=0000
i915 device info: slice4 0 subslices mask=0000
i915 device info: slice5 0 subslices mask=0000
i915 device info: slice6 0 subslices mask=0000
i915 device info: EU total: 24
i915 device info: EU per subslice: 8
i915 device info: has slice power gating: no
i915 device info: has subslice power gating: no
i915 device info: has EU power gating: yes
i915 device info: CS timestamp frequency: 12000 kHz
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] status updated from unknown to connected
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[drm:intel_fb_initial_config [i915]] Not using firmware configuration
[drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
[drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
[drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
[drm:intelfb_create [i915]] no BIOS fb, allocating a new one
[drm:intelfb_create [i915]] allocated 1920x1080 fb: 0x00040000
fbcon: inteldrmfb (fb0) is primary device
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_edp_backlight_off [i915]]
PKCS#7 signature not signed with a trusted key
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia-nvlink: Nvlink Core is being initialized, major device number 239
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 396.24.02 Thu May 24 03:48:07 PDT 2018 (using threaded interrupts)
usb 1-5: new full-speed USB device number 3 using xhci_hcd
PKCS#7 signature not signed with a trusted key
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24.02 Thu May 24 03:44:56 PDT 2018
PKCS#7 signature not signed with a trusted key
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
random: fast init done
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[drm:intel_disable_pipe [i915]] disabling pipe A
[drm:intel_edp_panel_off.part.36 [i915]] Turn eDP port A panel power off
[drm:intel_edp_panel_off.part.36 [i915]] Wait for panel power off time
[drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[drm:edp_panel_on [i915]] Turn eDP port A panel power on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: ATA-10: Crucial_CT2050MX300SSD1, M0CR060, max UDMA/133
ata5.00: 4004704368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: supports DRM functions and may not be fully accessible
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Crucial_CT2050MX R060 PQ: 0 ANSI: 5
ata5.00: Enabling discard_zeroes_data
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: [sda] 4004704368 512-byte logical blocks: (2.05 TB/1.86 TiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: Enabling discard_zeroes_data
sda: sda1
ata5.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sda] supports TCG Opal
sd 4:0:0:0: [sda] Attached SCSI disk
usb 1-5: New USB device found, idVendor=046d, idProduct=0a5c, bcdDevice=10.01
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Logitech G633 Gaming Headset
usb 1-5: Manufacturer: Logitech
usb 1-5: SerialNumber: 00000000
usb 1-7: new high-speed USB device number 4 using xhci_hcd
usb 1-7: New USB device found, idVendor=03f0, idProduct=9d1d, bcdDevice= 2.28
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: HP lt4120 Snapdragon X5 LTE
usb 1-7: Manufacturer: HP
usb 1-7: SerialNumber: 0123456789ABCDEF
usb 1-8: new high-speed USB device number 5 using xhci_hcd
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_on [i915]] Wait for panel power on
[drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
usb 1-8: New USB device found, idVendor=04f2, idProduct=b5a7, bcdDevice=36.01
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: Chicony USB 2.0 Camera
usb 1-8: Manufacturer: SunplusIT Inc
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
usb 1-10: new full-speed USB device number 6 using xhci_hcd
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
[drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[drm:intel_dp_start_link_train [i915]] clock recovery OK
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[drm:intel_enable_pipe [i915]] enabling pipe A
[drm:intel_edp_backlight_on [i915]]
[drm:intel_panel_enable_backlight [i915]] pipe A
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:intel_enable_sagv [i915]] Enabling the SAGV
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-10: New USB device found, idVendor=06cb, idProduct=0078, bcdDevice= 1.54
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10: SerialNumber: 7ce9b80f4766
[drm:drm_fb_helper_hotplug_event.part.36 [drm_kms_helper]]
[drm:drm_setup_crtcs [drm_kms_helper]]
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_setup_crtcs [drm_kms_helper]] connector 71 enabled? yes
[drm:intel_fb_initial_config [i915]] Not using firmware configuration
[drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 71
[drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 71 0
[drm:drm_setup_crtcs [drm_kms_helper]] found mode 1920x1080
[drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 1920x1080 config
[drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 41 (0,0)
psmouse serio2: synaptics: queried max coordinates: x [..5656], y [..4728]
usb 1-14: new full-speed USB device number 7 using xhci_hcd
psmouse serio2: synaptics: queried min coordinates: x [1284..], y [1128..]
psmouse serio2: synaptics: Your touchpad (PNP: SYN1220 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
usb 1-14: New USB device found, idVendor=8087, idProduct=0025, bcdDevice= 0.02
usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
psmouse serio2: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x26800/0x0, board id: 3261, fw id: 2393254
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046D:C332.0001/input/input15
hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input0
input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:046D:C332.0002/input/input16
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input12
hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:14.0-4/input1
input: Logitech Logitech G633 Gaming Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.3/0003:046D:0A5C.0003/input/input17
hid-generic 0003:046D:0A5C.0003: input,hiddev1,hidraw2: USB HID v1.11 Device [Logitech Logitech G633 Gaming Headset] on usb-0000:00:14.0-5/input3
PKCS#7 signature not signed with a trusted key
nvhda: version 0.01
nvhda: Found nv VGA device 0000:01:00.0
nvhda: enabling audio
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0x7f080000-0x7f083fff]
iommu: Adding device 0000:01:00.1 to group 1
nvhda: Audio found, adding
pci 0000:01:00.1: BAR 0: assigned [mem 0x7f080000-0x7f083fff]
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
nvhda: Found nv audio device 0000:01:00.1
nvhda: Succesfully loaded. Audio 0000:01:00.0 is on
raid6: sse2x1 gen() 14167 MB/s
raid6: sse2x1 xor() 10427 MB/s
raid6: sse2x2 gen() 17460 MB/s
raid6: sse2x2 xor() 11835 MB/s
raid6: sse2x4 gen() 20414 MB/s
raid6: sse2x4 xor() 12900 MB/s
raid6: avx2x1 gen() 29589 MB/s
raid6: avx2x1 xor() 20488 MB/s
raid6: avx2x2 gen() 36281 MB/s
raid6: avx2x2 xor() 22437 MB/s
raid6: avx2x4 gen() 41226 MB/s
raid6: avx2x4 xor() 25513 MB/s
raid6: using algorithm avx2x4 gen() 41226 MB/s
raid6: .... xor() 25513 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_mode_addfb2 [drm]] [FB:82]
random: plymouthd: uninitialized urandom read (8 bytes read)
random: plymouthd: uninitialized urandom read (8 bytes read)
[drm:drm_mode_addfb2 [drm]] [FB:82]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice System Slice.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on fsck to fsckd communication Socket.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice system-postfix.slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
clevo_xsm_wmi: unknown parameter 'kb_mode' ignored
clevo_xsm_wmi: unknown parameter 'kb_mode' ignored
clevo_xsm_wmi: Model Eurocom Q6 found
EXT4-fs (nvme0n1p5): re-mounted. Opts: errors=remount-ro
systemd-journald[524]: Received request to flush runtime journal from PID 1
input: Clevo Airplane-Mode Hotkey as /devices/platform/clevo_xsm_wmi/input/input20
clevo_xsm_wmi: Polling thread started (PID: 567), polling at 5 Hz
clevo_xsm_wmi clevo_xsm_wmi: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
PKCS#7 signature not signed with a trusted key
nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 237
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180313/nsarguments-66)
[drm:asle_work [i915]] bclp = 0x800000ff
[drm:asle_work [i915]] updating opregion backlight 255/255
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=60000/60000
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
random: crng init done
random: 5 urandom warning(s) missed due to ratelimiting
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
DMAR: 32bit 0000:01:00.0 uses non-identity mapping
media: Linux media interface: v0.10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver qmi_wwan
Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Loading compiled-in X.509 certificates for regulatory database
usbcore: registered new interface driver btusb
Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
Bluetooth: hci0: Device revision is 2
Bluetooth: hci0: Secure boot is enabled
Bluetooth: hci0: OTP lock is enabled
Bluetooth: hci0: API lock is enabled
Bluetooth: hci0: Debug lock is disabled
Bluetooth: hci0: Minimum firmware build 1 week 10 2014
uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b5a7)
Bluetooth: hci0: Found device firmware: intel/ibt-18-16-1.sfi
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
DMAR: 64bit 0000:01:00.1 uses identity mapping
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_power_well_enable [i915]] enabling power well 2
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:03:00.0: loaded firmware version 38.c0e03d94.0 op_mode iwlmvm
uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
input: Chicony USB 2.0 Camera: Chicony as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 9260, REV=0x324
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input27
input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
usb 1-5: 1:1: cannot get freq at ep 0x81
usb 1-5: 2:1: cannot get freq at ep 0x1
iwlwifi 0000:03:00.0: base HW address: 74:e5:f9:5e:8c:ab
usbcore: registered new interface driver snd-usb-audio
qmi_wwan 1-7:3.0: cdc-wdm2: USB WDM device
qmi_wwan 1-7:3.0 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-7, WWAN/QMI device, ca:42:93:44:68:41
qmi_wwan: probe of 1-7:3.2 failed with error -22
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone3: failed to read out thermal zone (-61)
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[drm:intel_power_well_disable [i915]] disabling power well 2
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input29
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input30
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input31
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver qcserial
qcserial 1-7:3.2: Qualcomm USB modem converter detected
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver cdc_mbim
qmi_wwan 1-7:3.0 wwp0s20f0u7c3: renamed from wwan0
Adding 8388604k swap on /dev/nvme0n1p6. Priority:-2 extents:1 across:8388604k SSFS
audit: type=1400 audit(1530013930.558:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1132 comm="apparmor_parser"
audit: type=1400 audit(1530013930.559:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1134 comm="apparmor_parser"
audit: type=1400 audit(1530013930.559:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1137 comm="apparmor_parser"
audit: type=1400 audit(1530013930.559:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1135 comm="apparmor_parser"
audit: type=1400 audit(1530013930.559:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc//sanitized_helper" pid=1135 comm="apparmor_parser"
audit: type=1400 audit(1530013930.560:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1133 comm="apparmor_parser"
audit: type=1400 audit(1530013930.560:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1133 comm="apparmor_parser"
audit: type=1400 audit(1530013930.560:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1133 comm="apparmor_parser"
audit: type=1400 audit(1530013930.560:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1138 comm="apparmor_parser"
audit: type=1400 audit(1530013930.560:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1138 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
r8169 0000:04:00.0 enp4s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Bluetooth: hci0: Waiting for firmware download to complete
Bluetooth: hci0: Firmware loaded in 1349702 usecs
Bluetooth: hci0: Waiting for device to boot
Bluetooth: hci0: Device booted in 14764 usecs
Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-18-16-1.ddc
Bluetooth: hci0: Applying Intel DDC parameters completed
wlp3s0: authenticate with e4:f4:c6:11:db:df
wlp3s0: send auth to e4:f4:c6:11:db:df (try 1/3)
wlp3s0: send auth to e4:f4:c6:11:db:df (try 2/3)
wlp3s0: authenticated
wlp3s0: associate with e4:f4:c6:11:db:df (try 1/3)
wlp3s0: RX AssocResp from e4:f4:c6:11:db:df (capab=0x1011 status=0 aid=3)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
show_signal_msg: 31 callbacks suppressed
gnome-shell[2257]: segfault at 20 ip 00007f00d4e7a55d sp 00007ffd69ac06d0 error 4 in libmutter-2.so.0.0.0[7f00d4d8c000+156000]
nvidia-modeset: Allocated GPU:0 (GPU-1bd3f3dc-5281-29b5-48c9-76f3eccd05e1) @ PCI:0000:01:00.0
[drm:drm_mode_addfb2 [drm]] [FB:79]
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_edp_backlight_off [i915]]
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[drm:intel_disable_pipe [i915]] disabling pipe A
[drm:intel_edp_panel_off.part.36 [i915]] Turn eDP port A panel power off
[drm:intel_edp_panel_off.part.36 [i915]] Wait for panel power off time
[drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000002 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CRTC:55:pipe B]
[drm:drm_mode_setcrtc [drm]] [CRTC:69:pipe C]
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CRTC:55:pipe B]
[drm:drm_mode_setcrtc [drm]] [CRTC:69:pipe C]
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
[drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_mode_addfb2 [drm]] [FB:80]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[drm:edp_panel_on [i915]] Turn eDP port A panel power on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000068
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_on [i915]] Wait for panel power on
[drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 0000006b
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[drm:intel_dp_start_link_train [i915]] clock recovery OK
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[drm:intel_enable_pipe [i915]] enabling pipe A
[drm:intel_edp_backlight_on [i915]]
[drm:intel_panel_enable_backlight [i915]] pipe A
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_edp_backlight_off [i915]]
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[drm:intel_disable_pipe [i915]] disabling pipe A
[drm:intel_edp_panel_off.part.36 [i915]] Turn eDP port A panel power off
[drm:intel_edp_panel_off.part.36 [i915]] Wait for panel power off time
[drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:intel_power_well_disable [i915]] disabling always-on
[drm:drm_mode_addfb2 [drm]] [FB:79]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_power_well_enable [i915]] enabling always-on
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[drm:edp_panel_on [i915]] Turn eDP port A panel power on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_on [i915]] Wait for panel power on
[drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
[drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[drm:intel_dp_start_link_train [i915]] clock recovery OK
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[drm:intel_enable_pipe [i915]] enabling pipe A
[drm:intel_edp_backlight_on [i915]]
[drm:intel_panel_enable_backlight [i915]] pipe A
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
usb 1-5: 2:1: cannot get freq at ep 0x1
[drm:intel_power_well_enable [i915]] enabling power well 2
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling power well 2
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:drm_mode_addfb2 [drm]] [FB:80]
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_edp_backlight_off [i915]]
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[drm:intel_disable_pipe [i915]] disabling pipe A
[drm:intel_edp_panel_off.part.36 [i915]] Turn eDP port A panel power off
[drm:intel_edp_panel_off.part.36 [i915]] Wait for panel power off time
[drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CRTC:55:pipe B]
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:drm_mode_setcrtc [drm]] [CRTC:69:pipe C]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CRTC:55:pipe B]
[drm:drm_mode_setcrtc [drm]] [CRTC:69:pipe C]
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068
[drm:edp_panel_vdd_on [i915]] eDP port A panel power wasn't enabled
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_mode_addfb2 [drm]] [FB:82]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[drm:edp_panel_on [i915]] Turn eDP port A panel power on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000068
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_on [i915]] Wait for panel power on
[drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 0000006b
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[drm:intel_dp_start_link_train [i915]] clock recovery OK
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[drm:intel_enable_pipe [i915]] enabling pipe A
[drm:intel_edp_backlight_on [i915]]
[drm:intel_panel_enable_backlight [i915]] pipe A
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_edp_backlight_off [i915]]
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
[drm:intel_disable_pipe [i915]] disabling pipe A
[drm:intel_edp_panel_off.part.36 [i915]] Turn eDP port A panel power off
[drm:intel_edp_panel_off.part.36 [i915]] Wait for panel power off time
[drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
[drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
[drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 41
[drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:intel_power_well_disable [i915]] disabling always-on
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:drm_mode_addfb2 [drm]] [FB:80]
[drm:drm_mode_setcrtc [drm]] [CRTC:41:pipe A]
[drm:drm_mode_setcrtc [drm]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_check [i915]] [CONNECTOR:71:eDP-1] checking for sink bpp constrains
[drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
[drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 540000 pixel clock 144400KHz
[drm:intel_dp_compute_config [i915]] DP link bw 14 rate select 00 lane count 4 clock 540000 bpp 24
[drm:intel_dp_compute_config [i915]] DP link bw required 433200 available 2160000
[drm:intel_psr_compute_config [i915]] PSR disable by flag
[drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] [CRTC:41:pipe A][modeset]
[drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
[drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
[drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 1682381, gmch_n: 8388608, link_m: 280396, link_n: 1048576, tu: 64
[drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
[drm:intel_dump_pipe_config [i915]] requested mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x0 0x9
[drm:intel_dump_pipe_config [i915]] adjusted mode:
[drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_dump_pipe_config [i915]] crtc timings: 144400 1920 1968 2000 2080 1080 1083 1088 1157, type: 0x40 flags: 0x9
[drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 1920x1080, pixel rate 144400
[drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
[drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
[drm:skl_dump_hw_state [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
[drm:intel_dump_pipe_config [i915]] planes on this crtc
[drm:intel_dump_pipe_config [i915]] [PLANE:28:plane 1A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:33:plane 2A] disabled, scaler_id = -1
[drm:intel_dump_pipe_config [i915]] [PLANE:38:cursor A] disabled, scaler_id = -1
[drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
[drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
[drm:intel_find_shared_dpll [i915]] [CRTC:41:pipe A] allocated DPLL 0
[drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
[drm:intel_power_well_enable [i915]] enabling always-on
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_atomic_commit_tail [i915]] [ENCODER:70:DDI A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 1
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 2
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 3
[drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 41
[drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
[drm:edp_panel_on [i915]] Turn eDP port A panel power on
[drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
[drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
[drm:wait_panel_status [i915]] Wait complete
[drm:edp_panel_on [i915]] Wait for panel power on
[drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
[drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010
[drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
[drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
[drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
[drm:wait_panel_status [i915]] Wait complete
[drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
[drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
[drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
[drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
[drm:intel_dp_start_link_train [i915]] clock recovery OK
[drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
[drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
[drm:intel_dp_start_link_train [i915]] [CONNECTOR:71:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
[drm:intel_enable_pipe [i915]] enabling pipe A
[drm:intel_edp_backlight_on [i915]]
[drm:intel_panel_enable_backlight [i915]] pipe A
[drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 60000
[drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
[drm:intel_fbc_enable [i915]] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
[drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
[drm:verify_connector_state.isra.118 [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_atomic_commit_tail [i915]] [CRTC:41:pipe A]
[drm:verify_single_dpll_state.isra.80 [i915]] DPLL 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:intel_power_well_enable [i915]] enabling power well 2
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port B
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port C
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
[drm:i915_audio_component_get_eld [i915]] Not valid for port D
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
rfkill: input handler disabled
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling power well 2
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_power_well_enable [i915]] enabling DC off
[drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
[drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_detect [i915]] [CONNECTOR:71:eDP-1]
[drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
[drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
[drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
[drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID HW-rev 0.0 SW-rev 0.0 quirks 0x0000
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
[drm:drm_add_display_info [drm]] non_desktop set to 0
[drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:71:eDP-1] probed modes :
[drm:drm_mode_debug_printmodeline [drm]] Modeline 72:"1920x1080" 144 346540 1920 1968 2000 2080 1080 1083 1088 1157 0x48 0x9
[drm:drm_mode_debug_printmodeline [drm]] Modeline 73:"1920x1080" 60 144400 1920 1968 2000 2080 1080 1083 1088 1157 0x40 0x9
[drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
[drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
[drm:intel_power_well_disable [i915]] disabling DC off
[drm:skl_enable_dc6 [i915]] Enabling DC6
[drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?
usb usb2-port6: Cannot enable. Maybe the USB cable is bad?